Vous n'êtes pas identifié(e).
Pages : 1
Bonjour,
je viens d’acquérir un pc neuf sous windows7 64b, j'essayee d'installer postgres9.1.1, mais les service ne se lance pas, que fautil faire.
PS: sur mon ancien pc Windows 7 32b aucun soucis
Merci d'avance
Hors ligne
Sans plus d'infos, on ne risque pas de pouvoir vous aider. Il faudrait nous donner un message d'erreur, qui vienne soit du journal des événements de PostgreSQL, soit du pg_log dans le répertoire des données de PostgreSQL.
Guillaume.
Hors ligne
Nous donner le contenu de la log de postgresql, pour commencer 
Sans ça, impossible de deviner ce qui ne va pas.
Au passage, nous dire si le service est bien lancé. Et si c'est un passage de l'ancien au nouveau pc, n'auriez-vous pas tout simplement essayé de recopier le répertoire de données PostgreSQL de l'ancien PC vers le nouveau ?
Marc.
Hors ligne
Alors j'ai désinstallé la 9.1 pour installer la 8.4plus mais les service ne démarre toujours pas, j'ai désactiver anti virus + firewall mais rien à faire.
# -----------------------------::::
# PostgreSQL configuration file::::
# -----------------------------::::
#::::
# This file consists of lines of the form::::
#::::
# name = value::::
#::::
# (The "=" is optional.) Whitespace may be used. Comments are introduced with::::
# "#" anywhere on a line. The complete list of parameter names and allowed::::
# values can be found in the PostgreSQL documentation.::::
#::::
# The commented-out settings shown in this file represent the default values.::::
# Re-commenting a setting is NOT sufficient to revert it to the default value;::::
# you need to reload the server.::::
#::::
# This file is read on server startup and when the server receives a SIGHUP::::
# signal. If you edit the file on a running system, you have to SIGHUP the::::
# server for the changes to take effect, or use "pg_ctl reload". Some::::
# parameters, which are marked below, require a server shutdown and restart to::::
# take effect.::::
#::::
# Any parameter can also be given as a command-line option to the server, e.g.,::::
# "postgres -c log_connections=on". Some parameters can be changed at run time::::
# with the "SET" SQL command.::::
#::::
# Memory units: kB = kilobytes Time units: ms = milliseconds::
# MB = megabytes s = seconds::::
# GB = gigabytes min = minutes::::
# h = hours::::
# d = days::::
::::
::::
#------------------------------------------------------------------------------::::
# FILE LOCATIONS::::
#------------------------------------------------------------------------------::::
::::
# The default values of these variables are driven from the -D command-line::::
# option or PGDATA environment variable, represented here as ConfigDir.::::
::::
#data_directory = 'ConfigDir' # use data in another directory::::
# (change requires restart)::::
#hba_file = 'ConfigDir/pg_hba.conf' # host-based authentication file::::
# (change requires restart)::::
#ident_file = 'ConfigDir/pg_ident.conf' # ident configuration file::::
# (change requires restart)::::
::::
# If external_pid_file is not explicitly set, no extra PID file is written.::::
#external_pid_file = '(none)' # write an extra PID file::::
# (change requires restart)::::
::::
::::
#------------------------------------------------------------------------------::::
# CONNECTIONS AND AUTHENTICATION::::
#------------------------------------------------------------------------------::::
::::
# - Connection Settings -::::
::::
listen_addresses = '*' # what IP address(es) to listen on;::::
# comma-separated list of addresses;::::
# defaults to 'localhost', '*' = all::::
# (change requires restart)::::
#port = 5432 # (change requires restart)::::
#max_connections = 100 # (change requires restart)::::
# Note: Increasing max_connections costs ~400 bytes of shared memory per :::
# connection slot, plus lock space (see max_locks_per_transaction).::::
#superuser_reserved_connections = 3 # (change requires restart)::::
#unix_socket_directory = '' # (change requires restart)::::
#unix_socket_group = '' # (change requires restart)::::
#unix_socket_permissions = 0777 # begin with 0 to use octal notation::::
# (change requires restart)::::
#bonjour_name = '' # defaults to the computer name::::
# (change requires restart)::::
::::
# - Security and Authentication -::::
::::
#authentication_timeout = 1min # 1s-600s::::
#ssl = off # (change requires restart)::::
#ssl_ciphers = 'ALL:!ADH:!LOW:!EXP:!MD5
# (change requires restart)::::
#password_encryption = on::::
#db_user_namespace = off::::
::::
# Kerberos and GSSAPI::::
#krb_server_keyfile = ''::::
#krb_srvname = 'postgres' # (Kerberos only)::::
#krb_caseins_users = off::::
::::
# - TCP Keepalives -::::
# see "man 7 tcp" for details::::
::::
#tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds;::::
# 0 selects the system default::::
#tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds;::::
# 0 selects the system default::::
#tcp_keepalives_count = 0 # TCP_KEEPCNT;::::
# 0 selects the system default::::
::::
::::
#------------------------------------------------------------------------------::::
# RESOURCE USAGE (except WAL)::::
#------------------------------------------------------------------------------::::
::::
# - Memory -::::
::::
#shared_buffers = 32MB # min 128kB::::
# (change requires restart)::::
#temp_buffers = 8MB # min 800kB::::
#max_prepared_transactions = 0 # zero disables the feature::::
# (change requires restart)::::
# Note: Increasing max_prepared_transactions costs ~600 bytes of shared memory:::
# per transaction slot, plus lock space (see max_locks_per_transaction).::::
# It is not advisable to set max_prepared_transactions nonzero unless you::::
# actively intend to use prepared transactions.::::
#work_mem = 1MB # min 64kB::::
#maintenance_work_mem = 16MB # min 1MB::::
#max_stack_depth = 2MB # min 100kB::::
::::
# - Kernel Resource Usage -::::
::::
#max_files_per_process = 1000 # min 25::::
# (change requires restart)::::
#shared_preload_libraries = '' # (change requires restart)::::
::::
# - Cost-Based Vacuum Delay -::::
::::
#vacuum_cost_delay = 0ms # 0-100 milliseconds::::
#vacuum_cost_page_hit = 1 # 0-10000 credits::::
#vacuum_cost_page_miss = 10 # 0-10000 credits::::
#vacuum_cost_page_dirty = 20 # 0-10000 credits::::
#vacuum_cost_limit = 200 # 1-10000 credits::::
::::
# - Background Writer -::::
::::
#bgwriter_delay = 200ms # 10-10000ms between rounds::::
#bgwriter_lru_maxpages = 100 # 0-1000 max buffers written/round::::
#bgwriter_lru_multiplier = 2.0 # 0-10.0 multipler on buffers scanned/round::::
::::
# - Asynchronous Behavior -::::
::::
#effective_io_concurrency = 1 # 1-1000. 0 disables prefetching::::
::::
::::
#------------------------------------------------------------------------------::::
# WRITE AHEAD LOG::::
#------------------------------------------------------------------------------::::
::::
# - Settings -::::
::::
#fsync = on # turns forced synchronization on or off::::
#synchronous_commit = on # immediate fsync at commit::::
#wal_sync_method = fsync # the default is the first option ::::
# supported by the operating system::::
# open_datasync::::
# fdatasync::::
# fsync::::
# fsync_writethrough::::
# open_sync::::
#full_page_writes = on # recover from partial page writes::::
#wal_buffers = 64kB # min 32kB::::
# (change requires restart)::::
#wal_writer_delay = 200ms # 1-10000 milliseconds::::
::::
#commit_delay = 0 # range 0-100000, in microseconds::::
#commit_siblings = 5 # range 1-1000::::
::::
# - Checkpoints -::::
::::
#checkpoint_segments = 3 # in logfile segments, min 1, 16MB each::::
#checkpoint_timeout = 5min # range 30s-1h::::
#checkpoint_completion_target = 0.5 # checkpoint target duration, 0.0 - 1.0::::
#checkpoint_warning = 30s # 0 disables::::
::::
# - Archiving -::::
::::
#archive_mode = off # allows archiving to be done::::
# (change requires restart)::::
#archive_command = '' # command to use to archive a logfile segment::::
#archive_timeout = 0 # force a logfile segment switch after this::::
# number of seconds; 0 disables::::
::::
::::
#------------------------------------------------------------------------------::::
# QUERY TUNING::::
#------------------------------------------------------------------------------::::
::::
# - Planner Method Configuration -::::
::::
#enable_bitmapscan = on::::
#enable_hashagg = on::::
#enable_hashjoin = on::::
#enable_indexscan = on::::
#enable_mergejoin = on::::
#enable_nestloop = on::::
#enable_seqscan = on::::
#enable_sort = on::::
#enable_tidscan = on::::
::::
# - Planner Cost Constants -::::
::::
#seq_page_cost = 1.0 # measured on an arbitrary scale::::
#random_page_cost = 4.0 # same scale as above::::
#cpu_tuple_cost = 0.01 # same scale as above::::
#cpu_index_tuple_cost = 0.005 # same scale as above::::
#cpu_operator_cost = 0.0025 # same scale as above::::
#effective_cache_size = 128MB::::
::::
# - Genetic Query Optimizer -::::
::::
#geqo = on::::
#geqo_threshold = 12::::
#geqo_effort = 5 # range 1-10::::
#geqo_pool_size = 0 # selects default based on effort::::
#geqo_generations = 0 # selects default based on effort::::
#geqo_selection_bias = 2.0 # range 1.5-2.0::::
::::
# - Other Planner Options -::::
::::
#default_statistics_target = 100 # range 1-10000::::
#constraint_exclusion = partition # on, off, or partition::::
#cursor_tuple_fraction = 0.1 # range 0.0-1.0::::
#from_collapse_limit = 8::::
#join_collapse_limit = 8 # 1 disables collapsing of explicit ::::
# JOIN clauses::::
::::
::::
#------------------------------------------------------------------------------::::
# ERROR REPORTING AND LOGGING::::
#------------------------------------------------------------------------------::::
::::
# - Where to Log -::::
::::
#log_destination = 'stderr' # Valid values are combinations of::::
# stderr, csvlog, syslog and eventlog,::::
# depending on platform. csvlog::::
# requires logging_collector to be on.::::
::::
# This is used when logging to stderr::::
#logging_collector = off # Enable capturing of stderr and csvlog::::
# into log files. Required to be on for::::
# csvlogs.::::
# (change requires restart)::::
::::
# These are only used if logging_collector is on::::
#log_directory = 'pg_log' # directory where log files are written,::::
# can be absolute or relative to PGDATA::::
#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # log file name pattern,::::
# can include strftime() escapes::::
#log_truncate_on_rotation = off # If on, an existing log file of the::::
# same name as the new log file will be::::
# truncated rather than appended to.::::
# But such truncation only occurs on::::
# time-driven rotation, not on restarts::::
# or size-driven rotation. Default is::::
# off, meaning append to existing files::::
# in all cases.::::
#log_rotation_age = 1d # Automatic rotation of logfiles will::::
# happen after that time. 0 disables.::::
#log_rotation_size = 10MB # Automatic rotation of logfiles will ::::
# happen after that much log output.::::
# 0 disables.::::
::::
# These are relevant when logging to syslog::::
#syslog_facility = 'LOCAL0'::::
#syslog_ident = 'postgres'::::
::::
#silent_mode = off # Run server silently.::::
# DO NOT USE without syslog or::::
# logging_collector::::
# (change requires restart)::::
::::
::::
# - When to Log -::::
::::
#client_min_messages = notice # values in order of decreasing detail::::
# debug5::::
# debug4::::
# debug3::::
# debug2::::
# debug1::::
# log::::
# notice::::
# warning::::
# error::::
::::
#log_min_messages = warning # values in order of decreasing detail::::
# debug5::::
# debug4::::
# debug3::::
# debug2::::
# debug1::::
# info::::
# notice::::
# warning::::
# error::::
# log::::
# fatal::::
# panic::::
::::
#log_error_verbosity = default # terse, default, or verbose messages::::
::::
#log_min_error_statement = error # values in order of decreasing detail::::
# debug5::::
# debug4::::
# debug3::::
# debug2::::
# debug1::::
# info::::
# notice::::
# warning::::
# error::::
# log::::
# fatal::::
# panic (effectively off)::::
::::
#log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements::::
# and their durations, > 0 logs only::::
# statements running at least this number::::
# of milliseconds::::
::::
::::
# - What to Log -::::
::::
#debug_print_parse = off::::
#debug_print_rewritten = off::::
#debug_print_plan = off::::
#debug_pretty_print = on::::
#log_checkpoints = off::::
#log_connections = off::::
#log_disconnections = off::::
#log_duration = off::::
#log_hostname = off::::
#log_line_prefix = '' # special values::::
# %u = user name::::
# %d = database name::::
# %r = remote host and port::::
# %h = remote host::::
# %p = process ID::::
# %t = timestamp without milliseconds::::
# %m = timestamp with milliseconds::::
# %i = command tag::::
# %c = session ID::::
# %l = session line number::::
# %s = session start timestamp::::
# %v = virtual transaction ID::::
# %x = transaction ID (0 if none)::::
# %q = stop here in non-session::::
# processes::::
# %% = '%'::::
# e.g. '<%u%%%d> '::::
#log_lock_waits = off # log lock waits >= deadlock_timeout::::
#log_statement = 'none' # none, ddl, mod, all::::
#log_temp_files = -1 # log temporary files equal or larger::::
# than the specified size in kilobytes;::::
# -1 disables, 0 logs all temp files::::
#log_timezone = unknown # actually, defaults to TZ environment::::
# setting::::
::::
::::
#------------------------------------------------------------------------------::::
# RUNTIME STATISTICS::::
#------------------------------------------------------------------------------::::
::::
# - Query/Index Statistics Collector -::::
::::
#track_activities = on::::
#track_counts = on::::
#track_functions = none # none, pl, all::::
#track_activity_query_size = 1024::::
#update_process_title = on::::
#stats_temp_directory = 'pg_stat_tmp'::::
::::
::::
# - Statistics Monitoring -::::
::::
#log_parser_stats = off::::
#log_planner_stats = off::::
#log_executor_stats = off::::
#log_statement_stats = off::::
::::
::::
#------------------------------------------------------------------------------::::
# AUTOVACUUM PARAMETERS::::
#------------------------------------------------------------------------------::::
::::
#autovacuum = on # Enable autovacuum subprocess? 'on' ::::
# requires track_counts to also be on.::::
#log_autovacuum_min_duration = -1 # -1 disables, 0 logs all actions and::::
# their durations, > 0 logs only::::
# actions running at least this number::::
# of milliseconds.::::
#autovacuum_max_workers = 3 # max number of autovacuum subprocesses::::
#autovacuum_naptime = 1min # time between autovacuum runs::::
#autovacuum_vacuum_threshold = 50 # min number of row updates before::::
# vacuum::::
#autovacuum_analyze_threshold = 50 # min number of row updates before ::::
# analyze::::
#autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum::::
#autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze::::
#autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum::::
# (change requires restart)::::
#autovacuum_vacuum_cost_delay = 20ms # default vacuum cost delay for::::
# autovacuum, in milliseconds;::::
# -1 means use vacuum_cost_delay::::
#autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for::::
# autovacuum, -1 means use::::
# vacuum_cost_limit::::
::::
::::
#------------------------------------------------------------------------------::::
# CLIENT CONNECTION DEFAULTS::::
#------------------------------------------------------------------------------::::
::::
# - Statement Behavior -::::
::::
#search_path = '"$user",public' # schema names::::
#default_tablespace = '' # a tablespace name, '' uses the default::::
#temp_tablespaces = '' # a list of tablespace names, '' uses::::
# only default tablespace::::
#check_function_bodies = on::::
#default_transaction_isolation = 'read committed'::::
#default_transaction_read_only = off::::
#session_replication_role = 'origin'::::
#statement_timeout = 0 # in milliseconds, 0 is disabled::::
#vacuum_freeze_min_age = 50000000::::
#vacuum_freeze_table_age = 150000000::::
#xmlbinary = 'base64'::::
#xmloption = 'content'::::
::::
# - Locale and Formatting -::::
::::
#datestyle = 'iso, mdy'::::
#intervalstyle = 'postgres'::::
#timezone = unknown # actually, defaults to TZ environment::::
# setting::::
#timezone_abbreviations = 'Default' # Select the set of available time zone::::
# abbreviations. Currently, there are::::
# Default::::
# Australia::::
# India::::
# You can create your own file in::::
# share/timezonesets/.::::
#extra_float_digits = 0 # min -15, max 2::::
#client_encoding = sql_ascii # actually, defaults to database::::
# encoding::::
::::
# These settings are initialized by initdb, but they can be changed.::::
#lc_messages = 'C' # locale for system error message::::
# strings::::
#lc_monetary = 'C' # locale for monetary formatting::::
#lc_numeric = 'C' # locale for number formatting::::
#lc_time = 'C' # locale for time formatting::::
::::
# default configuration for text search::::
#default_text_search_config = 'pg_catalog.simple'::::
::::
# - Other Defaults -::::
::::
#dynamic_library_path = '$libdir'::::
#local_preload_libraries = ''::::
::::
::::
#------------------------------------------------------------------------------::::
# LOCK MANAGEMENT::::
#------------------------------------------------------------------------------::::
::::
#deadlock_timeout = 1s::::
#max_locks_per_transaction = 64 # min 10::::
# (change requires restart)::::
# Note: Each lock table slot uses ~270 bytes of shared memory, and there are:::
# max_locks_per_transaction * (max_connections + max_prepared_transactions)::::
# lock table slots.::::
::::
::::
#------------------------------------------------------------------------------::::
# VERSION/PLATFORM COMPATIBILITY::::
#------------------------------------------------------------------------------::::
::::
# - Previous PostgreSQL Versions -::::
::::
#add_missing_from = off::::
#array_nulls = on::::
#backslash_quote = safe_encoding # on, off, or safe_encoding::::
#default_with_oids = off::::
#escape_string_warning = on::::
#regex_flavor = advanced # advanced, extended, or basic::::
#sql_inheritance = on::::
#standard_conforming_strings = off::::
#synchronize_seqscans = on::::
::::
# - Other Platforms and Clients -::::
::::
#transform_null_equals = off::::
::::
::::
#------------------------------------------------------------------------------::::
# CUSTOMIZED OPTIONS::::
#------------------------------------------------------------------------------::::
::::
#custom_variable_classes = '' # list of custom variable class names::::
Hors ligne
Ça c'est le fichier de configuration. Nous ce qui nous intéresse, c'est la log (le fichier le plus récent dans le répertoire pg_log).
Et restez avec PostgreSQL 9.1.
Marc.
Hors ligne
Ça c'est le fichier de configuration. Nous ce qui nous intéresse, c'est la log (le fichier le plus récent dans le répertoire pg_log).
Et restez avec PostgreSQL 9.1.
Je" n'ai pas de répertoire pg_log
Hors ligne
Sinon l'erreur retournée dans l'observateur d’évènement s'il y a quelque chose pour postgresql.
Julien.
https://rjuju.github.io/
Hors ligne
Je suis vraiment newbie sur PG ou se trouve le journal d'évennement, aussi lors de l'installation j'ai eu ce message d'erreur :
Problem running post-install step. Installation may not complete correctly.
L'initialisation du cluster de bases de données a échoué
Hors ligne
En fait, ton installation n'a pas marchée (le initdb a échoué) et donc Postgresql ne peut pas se lancer.
Il faudrait que tu refasses une installation complète en vérifiant les droits sur le répertoire ou tu places le répertoire DATA si c'est la cause de l'erreur, ou alors faire un initdb à la main (http://docs.postgresqlfr.org/9.0/app-initdb.html) sur ce même répertoire.
Julien.
https://rjuju.github.io/
Hors ligne
L'installeur n'arrive pas à créer le répertoire des données, c'est ça votre problème. Reste le pourquoi. Vous devez avoir un fichier de log de l'installeur. Lui vous indiquera la raison du problème.
Guillaume.
Hors ligne
J'ai désinstallé x fois mais toujours la même erreur,
Hors ligne
Vous devez avoir un fichier de log de l'installeur. Lui vous indiquera la raison du problème.
Quel est le chemin de ce fichier?
Dernière modification par randwic (04/10/2011 14:53:54)
Hors ligne
Il faudrait que tu refasses une installation complète en vérifiant les droits sur le répertoire ou tu places le répertoire DATA si c'est la cause de l'erreur.
UN GRAND MERCI
SUJET réglé
Hors ligne
Je ne me rappelle plus. À un moment, c'était dans le répertoire de l'installeur. Il est possible que ce soit maintenant dans le répertoire %TEMP%. Et malheureusement, je ne peux pas tester actuellement (pas de windows ici).
Guillaume.
Hors ligne
Pages : 1
